The Holistic Instrution On How To Clean White Converse Shoes

White Converse sneakers are a versatile addition to any wardrobe, suitable for all seasons. They effortlessly pair with a variety of outfits for a stylish everyday appearance.

Regrettably, white Chucks are prone to staining and may appear unkempt without appropriate maintenance.

Don’t worry, cleaning white Converse shoes is simple. Stains can be hand-washed using toothpaste or baking soda. Keep reading for our best advice on cleaning Chucks and maintaining their pristine condition!

NOTICE BEFORE CLEANING YOUR WHITE CONVERSE SHOES

It is essential to always take off the laces prior to cleaning any pair of shoes. By doing so, you’ll find it much easier to clean around the shoe’s eyelets and tongues.

In case your laces also need a thorough scrubbing, feel free to clean them individually.

CAN WASH WHITE CONVERSE IN THE WASHER?

Converse highly advises against using a washing machine for their shoes. However, if you still prefer to use a washer, follow these tips to safeguard your footwear.

PRE-RINSE

Excess dirt on your Chucks may clog the washer, so it’s a good idea to rinse them under warm water before putting them in the machine.

UTILIZE A LAUNDRY BAG

Shoes can suffer damage from zippers and adornments on other laundry items. To prevent snags, place your shoes in a mesh laundry bag.

Using mesh bags for shoes is advisable even if you’re only washing shoes in the washer. Otherwise, they might catch on the drum’s metal edges. You can find mesh bags in various sizes on Amazon.

Be sure to remove the laces before putting the shoes in a mesh bag to prevent the laces from obstructing the eyelets and tongues from being cleaned.

We’ll discuss how to wash the laces separately later in this guide.

OPT FOR A MILD DETERGENT

Refrain from using harsh detergents or stain removers on your Converse shoes. Powerful detergents, especially those containing bleach, may cause your Chucks to turn yellow.
Instead, choose a mild detergent designed for delicate fabrics.

CHOOSE A COOL CYCLE

Set your washer to a gentle cycle at the lowest temperature. Washing at higher heat can weaken the glue and diminish the brightness of your Chucks.

AIR DRY

After the cycle is complete, hang your Converse shoes to dry. Avoid using a dryer, as the heat can damage your footwear. Maintain the shape of your shoes by stuffing them with paper towels. Keep them out of direct sunlight while drying to prevent discoloration.

STEP TO HANDWASH WHITE CONVERSE SHOES

Handwashing your Converse is significantly safer than using a washer, as it prevents exposure to excessive heat and minimizes the risk of snags during spinning.

To handwash, create a cleaning solution using dish soap, toothpaste, and baking soda. You’ll also need water, a sponge, an old toothbrush, a cloth, and paper towels.

INSTRUCTIONS

1. Dampen the sponge with room-temperature water and gently remove excess dirt from the shoes.
2. Combine 50g each of toothpaste, baking soda, and dish soap.
3. Add water to create a thick paste.
4. Apply the paste to your Converse using the toothbrush.
5. Scrub your shoes with the toothbrush.
6. As you clean, use the cloth to wipe away dirt.
7. Rinse your shoes under lukewarm water.
8. Stuff your shoes with paper towels to maintain their shape while drying.
9. Hang your Converse to dry, avoiding direct sunlight.

After handwashing, you may notice some stains persist. To treat these, you can use baking soda or toothpaste as targeted stain removers.

STEP TO WASH WHITE CONVERSE WITH BAKING SODA

After handwashing, you might notice some lingering stains. To treat these, you can use baking soda or toothpaste as targeted stain removers.

INSTRUCTIONS

1. Remove the laces. We’ll provide instructions for cleaning the laces later.
2. Mix baking soda, white vinegar, and warm water to form a paste-like consistency.
3. Fill a sink or tub with cool water.
4. Submerge your Converse in the water.
5. Apply the paste to stained areas on your shoes using an old toothbrush.
6. Rinse away the paste with lukewarm water and a cloth.
7. Stuff your shoes with paper towels to maintain their shape while drying.
8. Hang your Converse to dry, avoiding direct sunlight.

If stains are still slightly visible after drying, you can repeat this process.

Read more: How To Get Stains Out Of White Converse?

STEP TO WASH WHITE CONVERSE WITH TOOTHPASTE

After handwashing your Chucks, toothpaste can also serve as a spot-on stain remover. Be sure to use a paste formula rather than a gel, and avoid colored toothpaste, as the dye can stain the material.

You’ll also need a tool to apply the toothpaste to the stains, such as an old toothbrush or scrubbing brush.

INSTRUCTIONS

1. Remove the laces. We’ll provide instructions for cleaning the laces later.
2. Generously apply toothpaste to the stained areas of your Converse using a toothbrush.
3. Let the toothpaste soak for 15 minutes.
   Rinse your shoes under lukewarm water.
4. Fill your shoes with paper towels to maintain their shape while drying.
5. Hang your Converse to dry, avoiding direct sunlight.

If stains are still slightly visible after drying, you can repeat this process.

HOW TO WASH CONVERSE SHOELACES?

Now that you have spotless shoes, it’s time to clean the laces to match! You can wash your laces by soaking them in a homemade cleaning solution for a few hours. You’ll need dish soap, toothpaste, baking soda, and warm water.

INSTRUCTIONS

If you haven’t already, remove the laces from your shoes. Place them in a tub or basin that you won’t need for a few hours.

1. Mix together 50ml each of dish soap, toothpaste, and baking soda.
2. Add 200ml of warm water.
3. Pour the solution into the tub or basin containing the laces.
4. Allow the laces to soak for around three hours.
5. Rinse your laces under lukewarm water.
6. Hang them to air-dry.

HOW TO CLEAN THE RUBBER OR SOLE OF WHITE SNEAKERS?

Converse rubber soles can become dirty quickly. Keep them in top condition using acetone.

Converse soles are made of rubber, making acetone safe to use on them. However, do NOT use acetone on the canvas, as it may cause discoloration.

Acetone is a potent cleaning solution often used as a nail polish remover. Ensure you purchase pure acetone without added ingredients.

You can find acetone at your local pharmacy or order it online from Amazon. To clean rubber soles with acetone, you’ll also need some clean cloths.

INSTRUCTIONS

1. Pour acetone onto a clean cloth.
2. Wipe down the soles with the acetone-soaked cloth.
3. Dampen another cloth with water.
4. Wipe away the acetone from the soles of your Converse.
5. Leave them to air-dry.

Read more: What To Wear With White Converse

HOW TO CLEAN WHITE CONVERSE WITHOUT TURNING THEM YELLOW?

DO NOT USE BLEACH ON CANVAS.

ENSURE WATER IS CLEAN.

RINSE THOROUGHLY.

AIR-DRY AWAY FROM DIRECT SUNLIGHT.

WHAT TO AVOID WHEN CLEANING YOUR WHITE CONVERSE

1. Avoid using bleach or acetone on the canvas of your shoes.
2. Don’t use a washer. But if you do, make sure to select a gentle, low-heat cycle.
3. Don’t rush the rinsing step. Detergent residue can lead to yellowing if not thoroughly rinsed.
4. Don’t use dirty or cloudy water when handwashing. Ensure the water is fresh and, if needed, filtered.
5. Never use a dryer to dry your shoes.
6. Don’t dry them in direct sunlight.

HOW TO QUICKLY CLEAN WHITE CONVERSE?

PROTECT YOUR WHITE CONVERSE

Q&A about cleaning white converse

Will my Converse turn yellow if I bleach them?

How to Remove Gum from Converse Shoes?

To remove gum from your Converse shoes, you can freeze the gum by placing your shoes in a plastic bag and putting them in the freezer for a couple of hours. Once the gum is frozen, use a blunt object, like a butter knife or a credit card, to gently scrape off the gum.

or Use Ice: Take an ice on gum, ice will freeze gume and you can remove it easily

Should I soak my Converse in water?

Soaking your Converse in water is not recommended as it may cause the glue to loosen and damage the shoe’s structure. Instead, use a gentle cleaning solution and a soft brush to clean your shoes.

Can I use a fan to dry my Converse?

Yes, using a fan to dry your Converse can help speed up the drying process. Make sure the shoes are placed in a well-ventilated area and not exposed to direct sunlight to prevent discoloration.

Can I put my Converse in hot water?

No, putting your Converse in hot water can cause the glue to loosen and damage the shoe’s structure. Always use lukewarm or room-temperature water when cleaning your shoes.

Can I dry my Converse with a hair dryer?

It is not recommended to dry your Converse with a hairdryer, as the heat can damage the glue and the shoe’s structure. Instead, air-dry your shoes in a well-ventilated area, away from direct sunlight.